Lexmark XM3250 - Waste from Electrical and Electronic Equipment (WEEE) directive; India E-Waste Notice; Product Disposal; EU Battery Directive

G
Note: For a video demonstration, see MPF pick roller and separator pad removal at
infoserve.lexmark.com/ids/sma.
Sensor (MPF paper present) removal
1 Open the front door.
2 Remove the screw (A).
3 Open the controller board access cover, disconnect the cable JMPFPP1, and then release the cable.
4 Remove the sensor.
Installation note: Pay attention to the position of the MPF sensor
flag
when installing the sensor.
7018
Parts removal
270