Lexmark XM3250 - Stapler Service Cover Removal; Stapler Controller Board Removal; Motor (Stapler Left Tamper) Removal

Stapler service cover removal
1 Remove the two screws (A) from the cover.
2 Press the latches (B) to release, and pull the service cover o the stapler.
Stapler controller board removal
1 Remove the stapler service cover. See “Stapler service cover removal” on page 341.
2 Disconnect all the cables from the stapler controller board.
3 Remove the five screws (A), and then remove the board.
Motor (stapler left tamper) removal
1 Remove the stapler service cover. See “Stapler service cover removal” on page 341.
2 Disconnect the cable (A).
7018
Parts removal
341