Mark Log
This setting allows you to create a service, maintenance, or custom log entry. Each log entry is added in the
printer event log.
1 Enter the Diagnostics menu, and then navigate to:
Event Log > Mark Log
2 Select a log that you want to create, and then touch Start.
Input tray quick print
This setting lets you print a single or continuous Quick Test page in either duplex or simplex mode.
1 Enter the Diagnostics menu, and then touch Input tray quick print.
2 Select where you want to print the pages from.
3 Select whether to print a single or continuous test page, and then touch Start.
Output bin quick feed
This setting allows you to send a single or continuous test page to a bin.
For non-touch-screen printer models, press
to navigate through the settings.
1 Enter the Diagnostics menu, and then touch Output bin quick feed.
2 Select where you want to send the test page.
3 Select whether to send a single or continuous test page, and then touch Start.
Printer Setup
Printed page count (mono)
This setting displays the amount of pages printed in mono.
1 Enter the Diagnostics menu, and then touch Printer Setup.
2 View the printed page count for mono.
Printed page count (color)
This setting displays the amount of pages printed in color.
1 Enter the Diagnostics menu, and then touch Printer Setup.
2 View the printed page count for color.
7018
Service menus
183
To Next Page
Loading...
