LSIS LSLV-S100 - Cooling Fan Control

Learning Advanced Features
179
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
In 65–71
Px terminal
configuration
Px Define(Px: P1–
P7)
16 Exchange - -
OU
31
Multi-function relay1
items
Relay1 17
Inverter
Line
- -
33
Multi-function output1
items
Q1 Define 18 Comm Line - -
Supply Power Transition Setting Details
Code
Description
In.65–71 Px Define
When the motor power source changes from inverter output to main supply
power, select a terminal to use and set the code value to 16 (Exchange). Power
will be switched when the selected terminal is on. To reverse the transition,
switch off the terminal.
OU.31 Realy 1 Define,
OU.33 Q1 Define
Set multi-function relay or multi-function output to 17 (Inverter Line) or 18
(COMM line). Relay operation sequence is as follows.
5.20 Cooling Fan Control
This function turns the inverter’s heat-sink cooling fan on and off. It is used in situations where the
load stops and starts frequently, or noise free environment is required. The correct use of cooling
fan control can extend the cooling fan’s life.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
Ad 64 Cooling fan control FAN Control 0 During Run
0–2
-