Learning to Perform Basic Operations
• A flashing number on the display indicates that the keypad is waiting for an input from the user.
Changes will be saved when the [ENT] key is pressed while the number is flashing. The setting
change will be canceled if you press any other key.
• Each code’s parameter values have default features and ranges specified. Refer to 8 Table of
Functions on page 259 for information about the features and ranges before setting or modifying
parameter values.
3.2.4 Configuring the [ESC] Key
The [ESC] key is a multi-functional key that can be configured to carry out a number of different
functions. Refer to 4.6 Local/Remote Mode Switching on page 83
for more information about the
other functions of the [ESC] key. The following example shows how to configure the [ESC] key to
perform a jog operation.
1
Ensure that you are currently at the first code of the Operation
group, and that code 0.00 (Command Frequency) is displayed.
2
Press the [▶] key.
You have moved to the initial code of the Drive group (dr.0).
To Next Page
Loading...
