LSIS LSLV-S100 - Parameter Lock

Learning Advanced Features
183
Code
Description
No
Procedure
1
[PROG/ENT] key on CNF-51 code will show the previous password
input window. If registration is made for the first time, enter 0. It is
the factory default.
2
If a password had been set, enter the saved password.
3
If the entered password matches the saved password, a new
window prompting the user to enter a new password will be
displayed (the process will not progress to the next stage until the
user enters a valid password).
4
Register a new password.
5
After registration, code CNF-51 will be displayed.
CNF-50 View Lock Set
To enable parameter view lock, enter a registered password. [Locked] sign
will be displayed on the screen to indicate that parameter view lock is
enabled. To disable parameter view lock, re-enter the password. The [locked]
sign will disappear.
5.25 Parameter Lock
Use parameter lock to prevent unauthorized modification of parameter settings. To enable
parameter lock, register and enter a user password first.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
dr
94 Password registration - -
0–9999
-
95 Parameter lock password - -
0–9999
-
CNF*
52 Parameter lock Key Lock Set Unlocked
0–9999
-
53 Parameter lock password Key Lock PW Password
0–9999
-
*Available on LCD keypad only.
Parameter Lock Setting Details
Code
Description
CNF-53 Key Lock Pw
Register a password to prohibit parameter modifications. Follow the
procedures below to register a password.
No
Procedures
1
Press the [PROG/ENT] key on CNF-53 code and the saved password
input window will be displayed. If password registration is being
made for the first time, enter 0. It is the factory default.
2
If a saved password has been set, enter the saved password.