LSIS LSLV-S100 - Control Menu

46
Learning to Perform Basic Operations
3.1.3 Control Menu
The S100 inverter control menu uses the following groups.
Group
Display
Description
Operation
-
Configures basic parameters for inverter operation.
These include reference frequencies and acceleration or
deceleration times. Frequencies will only be displayed if
an LCD keypad is in use.
Drive
dr
Configures parameters for basic operations. These
include jog operation, motor capacity evaluation,
torque boost, and other keypad related parameters.
Basic
ba
Configures basic parameters, including motor-
related parameters and multi-step frequencies.
Advanced
ad
Configure acceleration or deceleration patterns and
to setup frequency limits.
Control
cn
Configures sensorless vector - related features.
Input Terminal
in
Configures input terminal–related features, including
digital multi–functional inputs and analog inputs.
Output Terminal
ou
Configures output terminal–related features such as
relays and analog outputs.
Communication
cm
Configures communication features for RS-485 or
other communication options.
Application
ap
Configures PID control–related sequences and
operations.
Protection
pr
Configures motor or inverter protection features.
Motor 2 (Secondary Motor)
m2
Configures secondary motor related features. The
secondary motor (M2) group appears on the keypad
only when one of the multi-function input terminals
(In.65–In.71) has been set to 26 (Secondary motor).
User Sequence
us
Used to implement simple sequences with various
function blocks.
User Sequence Function
uf