LSIS LSLV-S100 - Changed Parameter Display; User Group

184
Learning Advanced Features
Code
Description
3
If the entered password matches the saved password, then a new
window to enter a new password will be displayed. (The process will
not move to next stage until the user enters a valid password).
4
Register a new password.
5
After registration, Code CNF-51 will be displayed.
CNF-52 Key Lock Set
To enable parameter lock, enter the registered password. [Locked] sign will be
displayed on the screen to indicate that prohibition is enabled. Once enabled,
Pressing the [PROG/ENT] key on function code will not allow the display edit
mode to run. To disable parameter modification prohibition, re-enter the
password. The [Locked] sign will disapear.
If parameter view lock and parameter lock functions are enabled, no inverter operation related function
changes can be made. It is very important that you memorize the password.
5.26 Changed Parameter Display
This feature displays all the parameters that are different from the factory defaults. Use this feature
to track changed parameters.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
CNF*
41
Changed parameter display
Changed Para
0
View All
-
-
* Available on LCD keypad only.
Changed Parameter Display Setting Details
Code
Description
CNF-41 Changed Para
Setting
Function
0
View All
Display all parameters
1
View Changed
Display changed parameters only
5.27 User Group
Create a user defined group and register user-selected parameters from the existing function
groups. The user group can carry up to a maximum of 64 parameter registrations.