LSIS LSLV-S100 - Page 374

360
Technical Specification
Items
Description
Output
Multi
function
open
collector
terminal
Fault output and inverter
operation status output
Less than DC 24V, 50mA
Multi
function
relay
terminal
Less than (N.O., N.C.) AC250V 1A,
Less than DC 30V, 1A
Analog
output
0-12Vdc (0-24mA): Select frequency, output current, output
voltage, DC terminal voltage and others
Pulse train
Maximum 32 kHz, 10-12V
Protection
function
Trip
• Over current trip
• External signal trip
• ARM short circuit current trip
• Over heat trip
• Input imaging trip
• Ground trip
• Motor over heat trip
• I/O board link trip
• No motor trip
• Parameter writing trip
• Emergency stop trip
• Command loss trip
• External memory error
• CPU watchdog trip
• Motor normal load trip
• Over voltage trip
• Temperature sensor trip
• Inverter over heat
• Option trip
• Output imaging trip
• Inverter overload trip
• Fan trip
• Pre-PID operation failure
• External break trip
• Low voltage trip during
operation
• Low voltage trip
• Safety A(B) trip
• Analog input error
• Motor overload trip
Alarm
Command loss trip alarm, overload alarm, normal load alarm,
inverter overload alarm, fan operation alarm, resistance braking
rate alarm, number of corrections on rotor tuning error
Instantaneous
blackout
Heavy load less than 15 ms (normal load less than 8 ms):
continue operation (must be within the rated input voltage and
rated output range)
Heavy load more than 15 ms (normal load more than 8 ms ):
auto restart operation
Structure/
working
environment
Cooling type
Forced fan cooling structure
Forced cooling type: 0.4-15 kW 200V/0.4-22 kW 400V (excluding
some models)
Protection structure
IP 20 , UL Open Type
(UL Enclosed Type 1 is satisfied by conduit installation option.)