<Multiple I/O>
Input Terminal Labels and Descriptions
Multi-
function
terminal
configuration
P1–P7
Multi-function
Input 1-7
Configurable for multi-function input terminals.
Factory default terminals and setup are as follows:
• P1: Fx
• P2: Rx
• P3: BX
• P4: RST
• P5: Speed-L
• P6: Speed-M
• P7: Speed-H
Standard I/O is only provided for P5.
CM
Common terminal for analog terminal inputs and
outputs.
Analog input
configuration
VR
Potentiometer
frequency
reference input
Used to setup or modify a frequency reference via
analog voltage or current input.
• Maximum Voltage Output: 12V
•
Maximum Current Output: 100mA,
To Next Page
Loading...
