LSIS XDL-L7SA002X User Manual

Table of Contents
iv
Safety Precautions
Safety precautions are categorized as either Danger or Caution, depending on the
seriousness of the precaution.
Precautions Definition
Danger
Failure to comply with guidelines may cause death or serious injury.
Caution
Failure to comply with guidelines may cause injury or property damage.
 Certain conditions that are listed as Caution may also result in serious injury.
 Electric Shock Precautions
Danger
 Before wiring or inspection tasks, turn off the power. Wait 15 minutes until the charge lamp
goes off, and then check the voltage.
 Be sure to ground both the servo drive and the servo motor.
 Only specifically trained professional engineers are permitted to perform wiring tasks.
 Perform wiring tasks after you install both the servo drive and the servo motor.
 Do not operate the device with wet hands.
 Do not open the servo drive cover while in operation.
 Do not operate the device with the servo drive cover removed.
 Even if the power is off, do not remove the servo drive cover.
 Fire Prevention Precautions
Caution
 Install the servo drive, the servo motor, and the regenerative resistance on non-combustible
material.
 In case of servo drive malfunction, disconnect the input power.

LSIS XDL-L7SA002X Specifications

General

Brand	LSIS
Model	XDL-L7SA002X
Category	Controller
Language	English