2. Installation
2-3
2.2 Servo Drive
2.2.1 Usage Environment
Item Requirements Notes
Ambient
temperature
0∼50[℃]
Caution
Install a cooling fan on the control panel in to keep the
surrounding temperature within the required range.
Ambient
humidity
90[%] RH or
lower
Caution
Condensation or freezing of moisture inside the drive during
prolonged periods of inactivity may damage it.
Remove any moisture completely before you operate the drive
after a prolonged period of inactivity.
External
vibration
Vibration
acceleration 4.9
[㎨] or lower
Excessive vibration reduces the lifespan of the machine and
causes malfunction.
Surrounding
conditions
No exposure to direct sunlight.
No corrosive gas or combustible gas.
No oil or dust.
Sufficient ventilation for closed areas.
To Next Page
Loading...