3. Wiring Method
3-19
3.5 Control Signal Wiring
3.5.1 Contact Input Signal
Caution
1. There are two input contacts based on the characteristics of individual signals: contact A and
contact B. They can be set by [P2-08] and [P2-09].
2. It is possible to turn each contact on or off forcibly with [Cn-07]. Take extra caution because
each contact is automatically turned off when power is off.
3. The signal definition of each contact can be modified by [P2-00], [P2-01], [P2-02], [P2-03], and
[P2-04].
R1: 3.3 K, R2: 680
To Next Page
Loading...