Megger Baker DX - Low-Voltage Test Probes; Low-Voltage Coil Connection

Setting up Fixtures, Test Accessories, and Lead Connections
megger.com 57
Low-voltage Test Probes
The 83004 low-voltage test probes are used during low-voltage armature or coil tests.
Essentially, resistance, inductance, and capacitance tests can be conducted using these low-
voltage Kelvin probes.
Figure 61. 83004 low-voltage test probes.
Low-voltage Coil Connection
For low-voltage single-coil testing, the tester’s low-voltage RLC test leads are used (leads 1 and 2
only).
1. Connect the low-voltage cables to a coil under test and proceed.
2. Ensure cables do not touch each other or a ground source during testing.
Figure 62. Connecting low-voltage cables to a coil.