Chapter 9 Appendix
247
9.2 Specifications (Cutting)
Item Details
Maximum speed
*1
300 mm/s (420 mm/s at 45 °)
Maximum acceleration 0.5 G
Cut pressure 10 to 450 gf
Cutter response count 10 times/second
Usable tools
Eccentric cutter, ballpoint pen (commercially sold)
*2
Usable media
Label paper (paper base), PVC sheet
*3
(not more than 0.25 mm in
thickness, including laminating layer), fluorescent sheet
*4
, reflective sheet
*4
(excluding high-luminosity reflective sheet)
Repetition accuracy ±0.2 mm or less (excluding expansion and contraction due to temperature)
Receive buffer memory 32 MB
Command MGL-II c2
Program steps 25 μm/step
*1. Depending on media size, the maximum speed may be limited. It is not possible to operate at both
maximum speed and maximum acceleration.
*2. Use one free of protrusions and tapers on the clamped part. Depending on the ballpoint pen, optimal
image quality may not be possible.
*3. When using Mimaki Engineering specified sheet
*4. When using fluorescent sheet blade (SPB-0007) or reflective sheet blade (SPB-0006)
9
To Next Page
Loading...
Need help?
General
