Chapter 1 Before Use
35
[FUNCTION] key
This section describes the functions and roles assigned to the [FUNCTION] key.
Icon Overview
Displays the various menu screens. "Settings"(P. 159)
Displays maintenance functions such as test printing and cleaning.
Switches from LOCAL mode to REMOTE mode.
Displays adjustment functions such as feed adjustment and drop position adjustment.
Displays the Heater Temperature Setup screen.
Clears received data.
Used to switch from REMOTE mode to LOCAL mode
Used to cut media
Used to move to the previous menu screen
Used to move to the next menu screen
Used to close the confirmation screen in response to prompts or other messages
Used to disable functions
Indicates that the function is assigned. Displays settings and functions.
Used to enable or disable multiple items
Displays the cutting condition input screen.
Displays the test cutting and other cutting related function screens.
Displays the pinch roller setting screen.
Displaying Machine Information (Local Guidance)
Press the [ENTER] key on the LOCAL mode screen to display the following information.
• Ink information: Displays ink type, remaining ink levels, and ink errors.
• Information: Displays information such as media width, head height, product serial number, firmware
version, command version, and LAN connection status.
• Nozzle check: Displays the number of nozzles detected as clogged in the nozzle check.
1
To Next Page
Loading...
Need help?
General
