MIMAKI JV330 Series User Manual

Chapter 2 Printing
74
• If the media width detection method is set to "MANUAL", set the media width manually
([MENU] > [Media Setting] > [Media Information] > [Media Width] > [Detection Type]
P. 161).
12
Detect the media width.
• No change: Only the right side of the media is detected.
• Media width re-detection: The media width is detected.
PVC
Media Width 1300 mm
No change
Media width
re-detection
• A notification reading "Media Set Position R" will appear after media width detection if the
media is too far to the right of the specified position. Reload media in the specified
position.
13
Detect the media bottom.
• Select [Execute].
Media detect
Start detecting the media trailing edge.
Execute
Not execute
14
Enter the number of pinch rollers being used.
• If the setting for [Function Setting] > [Use PR Number Query] is "OFF", the screen for entering the
number of pinch rollers will not be displayed.

MIMAKI JV330 Series Specifications

General

Brand	MIMAKI
Model	JV330 Series
Category	Printer
Language	English