7.9 Operation using VNC
VNC (on the enclosed CD-ROM) stands for "virtual network computing" and is a program
for remote operation of computers.
The program distinguishes between the VNC server and VNC client (viewer). The server
program is part of the device software, the client program (viewer) must be run on the
notebook/PC in order to operate the device.
Note:
The VNC version provided on CD must be used. More recent VNC versions (freeware)
from the internet are not supported by the device!
For direct operation using the VNC program, the IP address (extended by :1) must be
specied when you run the program, e.g., 172.24.20.233:1.
Note:
In the device, the VNC access to certain notebooks/PCs can be limited, see
Chapter 7.15.6.
The VNC-user interface is displayed.
7 Commissioning Transmitter in eld housing PR 5230
EN-113 Minebea Intec
To Next Page
Loading...
