Minebea Intec PR 5230 - Inputs and Outputs

9.1.2 Inputs and outputs
There are dierent modes for testing the analog and digital inputs and outputs:
1. Plug the test connector (see Chapter 18.2) into the RS-485 interface.
2. Place the switch in the proper position, see Chapter 18.2.
3. Select and conrm the desired interface.
- passed = ok
- failed (no data) = error
The results are displayed:
4. Press the key to return to the previous window.
9 Extended functions Transmitter in eld housing PR 5230
EN-229 Minebea Intec