Minebea Intec PR 5230 - 4.4.6.8 Connecting an IS platform

Weight Status Indicator
LEDs Standstill Center zero Below zero or above FSD
lit
lit
lit
Note:
For weight error status, see Chapter 16.2.
3.4.4 Operating elements
3.4.4.1 Keys on the device
WARNING
Working on the device while it is switched on may have life-threatening
consequences.
Product operation must be performed by trained and qualied personnel who are
aware of and able to deal with the related hazards and take suitable measures for
self-protection.
The 3 buttons are accessible only when the housing door is open. The following functions
can be performed:
- Zero setting (1)
- Taring (2)
- Test measurement (3)
- Display of software version and board number by simultaneous actuation of push-
buttons (1) and (3)
- Update software with the "FlashIt!32" program (see Chapter 9.1.5.1) by pressing the (1)
and (3) keys simultaneously and pressing the (2) key three times.
Transmitter in eld housing PR 5230 3 Device description
Minebea Intec EN-22