Minebea Intec PR 5230 - 4.4.6.9 Connecting digital load cells from type Pendeo; 4.4.7 Digital inputs

Adjustment or parameter entry is
- not possible using the push-buttons.
- Only possible using a Notebook/PC via VNC (see Chapter 7.9)/Internet browser (see
Chapter 7.10).
3.4.4.2 User interface
The following tables show the basic meanings of symbols on the operator interface.
Indicator keys
Display gross weight Sets gross weight to zero, provided that
- weight value is stable;
- weight is within zero setting range.
This function depends on the conguration.
Display tare weight. Starts a printout.
Taring
The current gross weight is stored in
the tare memory, provided that
- weight value is stable;
- the instrument is not in error sta-
tus.
This function depends on the congu-
ration.
Navigation/menu keys
Scroll up in the menu. Conrm input/selection.
Scroll down in the menu. - Backspace
- Pressing the delete key deletes indivi-
dual characters (within an entry).
- Cursor to the left
- Selection
- Cancel entry/selection (after a conr-
mation prompt) without saving the ch-
ange.
- Exit parameters/menu window.
- Cursor to the right
- Selection
3 Device description Transmitter in eld housing PR 5230
EN-23 Minebea Intec