Minebea Intec PR 5230 - Profinet I;O Interface

Display:
1 2 3 4
Constant ---:
No power
Constant ---:
No power
Constant ---:
No power
Constant ---:
No power
Constant grn:
Normal function
Constant red:
CRC error, inadmis-
sible station or baud
rate.
Constant grn:
Send data.
Constant grn:
Receive data.
Legend
--- o
red red
grn green
4.6.8.3 Connection
NOTICE
The cable screen must be guided into the instrument through the cable gland and
connected to terminal  in terminal contact 4 (S).
Before, during and after installation, make sure that the sealing rings are seated
correctly.
4.6.9 ProNet I/O interface
The ProNet I/O interface card has the type designation PR 1721/46.
The eldbus card is equipped with a standard RJ-45 socket  for network connection.
contains powerful UDP/IP connecting circuitry with transfer rates of 10 or 100 Mbit/s.
The card is inserted into "Slot 2"  (see Chapter 4.6.1).
4 Device installation Transmitter in eld housing PR 5230
EN-95 Minebea Intec