Minebea Intec PR 5230 - Page 99

Specications
Description Data
Transmission rate 10 Mbit/s and 100 Mbit/s
Auto detection (100, FullDX)
Protocol ProNet I/O
Connection mode Network
Conguration XML le
"GSDML-Vx.xx-Sartorius-PR5230-xxxxxx.xml"
Potential isolation yes
Cable type Twisted pairs, screened, e.g. patch cable CAT5 Autolink (stra-
ight or crossover)
Cable impedance
150 Ω
Cable length to HUB Max. 115 m
Certicate ProBus Nutzerorganisation e.V. for HMS Industrial Net-
works AB
Certicate No: Z10931
Note:
The IP address and the subnet mask are set at - [Fieldbus parameter] (see also
Chapters 7.15.5 and 12.2).
The XML le is stored on the CD (Fieldbus directory of the corresponding instrument)
supplied with the unit. The current le is also available for download via the Internet.
http://www.minebea-intec.com
Transmitter in eld housing PR 5230 4 Device installation
Minebea Intec EN-96