Minebea Intec PR 5230 - Configuring Analog Output

7.15.11.1 VNC display
The status is indicated from right to left.
7.15.11.2 Device display
The status is indicated from left to right.
7.15.12 Conguring analog output
The weight value of the weighing point is transmitted to the output.
Dene the parameters for the analog output under -[Analog output parameter].
The analog output can be congured according to the table below.
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-208