Minebea Intec PR 5230 - Error Messages for Xbpi Scales

Note:
VNC text, see also Chapter 16.1.
LED E:Arith E:Invrs E:Overl E:NoSig E:Sense E:HardE/ E:NoCom
Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz Altern. ash. 1Hz
Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz
Flash. 1Hz Flash. 1Hz Flash. 1Hz Flash. 1Hz Altern. ash. 1Hz Altern. ash. 1Hz
Note:
With all other messages, the upper status indicator LED blinks.
16.3 Error messages for xBPI scales
Display VNC text Error and possible cause Remote dis-
play
E:NoSig Ext. meas. device error No weight values can be read from scale:
- Scale error
Error 3
E:Value Value exceeds display The weight value is not displayed:
- Too many digits have been set.
Error 4
E:NoCom No values from scale No communication with xBPI scale:
- Cable break.
- Internal scale error.
- The scale is not connected to the power sup-
ply.
Error 9
E:NoWgt No weight data No weight display:
- Another weighing point was selected.
Press to assign the new weighing point to
the device.
Error •
16 Error messages Transmitter in eld housing PR 5230
EN-287 Minebea Intec