4.3.2 Connecting the equipotential bonding conductor
In potentially explosive atmospheres an equipotential bonding conductor must be
connected; see option WE1 additional information.
4.4 Hardware construction
The main electronics circuitry is accommodated on the following PCBs:
- Main board (2)
- Display board (1)
- Weighing electronics board (3)
4.4.1 Main board
The main board provides the slots for the
- Analog output board (4), option/accessories
- Fieldbus card (3), option/accessories
The lithium battery (2) is always activated and powers the calendar/clock module.
4 Device installation Transmitter in eld housing PR 5230
EN-33 Minebea Intec
To Next Page
Loading...
