NOTICE
Property damage is possible.
If a seal insert is not used, it must be sealed with a supplied locking pin.
NOTICE
Property damage is possible.
Regularly check the tted cable gland for tightness and re-tighten it, if necessary.
4.2.3 Cabling
In principle, the cables can be taken through all cable glands corresponding to the cable
diameters. The following gure shows a proposed topology:
Legend
No. Description
1 Power supply: 230 V AC or 24 V DC
2 Digital outputs: Relay/optocoupler
3 Serial interfaces
4 Ethernet socket (option/accessory)
5
14 load cells
6 1 load cell or junction box or eldbus cards
7 Analog output or eldbus cards
8 Digital inputs: internal/external
4 Device installation Transmitter in eld housing PR 5230
EN-31 Minebea Intec
To Next Page
Loading...
