Minebea Intec PR 5230 - Selecting and Configuring Serial Interfaces

Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Conguring analog output [Analog output parameter]
7.15.1 Selecting and conguring serial interfaces
The interfaces are congured under this menu item.
7.15.1.1 Printer protocol
Select - [Serial ports parameter] and conrm.
The following window opens.
7 Commissioning Transmitter in eld housing PR 5230
EN-177 Minebea Intec