Minebea Intec PR 5230 - Calibrating Xbpi-Scale; General Information; Parameters for Serial Interface

7.13 Calibrating xBPI-scale
7.13.1 General information
The legal-for-trade application of PR 5230 with a xBPI-scale is not possible.
7.13.2 Parameters for serial interface
3. Setting interval range 1: Enter "1500 kg" for range limit 1.
4. Setting interval range 2: Enter "2900 kg" for range limit 2.
5. Press the softkey to exit and save calibration.
1. Select -[Serial ports parameter]- [xBPI-Port] and conrm.
The following window opens:
2. Select the desired interface and conrm.
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-148