14.3 Soldering work
Soldering work on the device is neither required nor permitted.
14.4 Cleaning
NOTICE
Property damage caused by unsuitable cleaning utensils/agents.
Damage to the device.
Prevent moisture from penetrating the interior.
Do not use aggressive cleaning agents (solvents or similar agents).
For use in the food industry, use a cleaning agent suitable for that particular working
environment.
Use soft sponges, brushes and cloths.
Spraying with water or blasting with compressed air is not permitted.
1. Unplug device from mains supply, disconnect any data cables.
2. Clean the device with a cloth lightly moistened with a soap solution.
3. Wipe down the device with a soft, dry cloth after cleaning.
Transmitter in eld housing PR 5230 14 Repairs and maintenance
Minebea Intec EN-284
To Next Page
Loading...
