Minebea Intec PR 5230 - Parameters for the Xbpi-Weighing Function

7.13.3 Parameters for the xBPI-weighing function
The following parameters must be entered for this menu item:
- Timeout for tare function depending on the application
- SBN-address for each xBPI-scale in bus operation mode
- Serial number of the xBPI-scale or weighing mode with legal-for-trade application
3. Press the [Param] softkey.
The following window opens:
4. If necessary, change the parameters. Only the "baudrate" and "stop bits" can be set
for an xBPI scale.
5. Press to exit the menu and to save the settings.
1. Select -[Weighing point]- [xBPI-Scale] and conrm.
7 Commissioning Transmitter in eld housing PR 5230
EN-149 Minebea Intec