2.8.2 Electrostatically sensitive parts
This device contains electro-statically sensitive components. Therefore, potential
equalization must be provided when working on the device (antistatic protection).
2.8.3 Replacing fuses
2.8.3.1 Replacing fuses with Y2/WE1 option
WARNING
Possible explosion due to improper replacement!
The replacement of fuses is not permitted!
2.8.3.2 Replacing fuses without Y2/WE1 option
WARNING
Damage due to overheating.
The use of repaired fuses and bypassing the fuse holder is prohibited.
Only the fuses specied in Chapters 17.3.2 and 17.3.3 are permitted!
2 Safety information Transmitter in eld housing PR 5230
EN-13 Minebea Intec
To Next Page
Loading...
