Minebea Intec PR 5230 - 12.2 Scale protocol (8-Byte) for the standard application; 12.2.1 Write window (input area); 12.2.2 Read window (output area)

4.5.4 Connecting 28 load cells (650 Ω) using a 6-wire connecting cable
Connections are made via junction box PR 6130/.. using connection cable PR 6135/.. or
PR 6136/... .
Load cell supply circuit
- Load resistance of load cell circuit ≥75 Ω, e.g. 8 load cells of 650 Ω each
- Supply voltage is xed to 12 V DC and protected against short circuit.
For further technical data, see Chapter 4.4.3.
4.5.5 Connecting load cells of type series PR 6221
See installation manuals of PR 6221 and PR 6021/08, -/68.
4 Device installation Transmitter in eld housing PR 5230
EN-67 Minebea Intec