4.4.2 Display board
The display board is connected to the main board by a ribbon cable.
4.4.3 Weighing electronics board
The weighing electronics board is plugged into the main board.
Two weighing electronics board versions are available:
- Standard (W1)
- With intrinsically safe load cell supply for operation of load cells/platforms
in Zones 1 and 21 (WE1); see Additional Information (WE1 option).
The load cell junction board (see Chapter 4.6.3) is connected to the weighing electronics
board using a ribbon cable for direct connection of up to four load cells.
4 Device installation Transmitter in eld housing PR 5230
EN-35 Minebea Intec
To Next Page
Loading...
