Minebea Intec PR 5230 - Page 209

Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
Example:
1. Select [Output 1] and conrm.
The output 1 [Output 1] is true (active), when the weight value drops below zero
(X35=1).
A selection window opens.
2. Select [below zero] and conrm.
3. Select [Output 2] and conrm.
A selection window opens.
Transmitter in eld housing PR 5230 7 Commissioning
Minebea Intec EN-206