Minebea Intec PR 5230 - Page 216

1. Select [Show Pendeo data] and conrm.
[Zero correction] (zero point correction)
The zero point correction in use is displayed.
[Communication error count] (communication error counter)
The communication errors (time frames exceeded) for the load cells are counted
here in ascending order and displayed.
[LC 1…n]
Bar graph display
The bar graph shows three areas:
A
dead load (can be changed by calibration)
B
Maximum capacity E
max
(max. capacity of load cell) including dead load (load cell,
cannot be changed)
An info window opens.
7 Commissioning Transmitter in eld housing PR 5230
EN-213 Minebea Intec