Loading the software on your notebook/PC
Now the device is ready to load the software.
The following is displayed:
1. Click the relevant le in the "Explorer" with the mouse and drag it into the [Select]
window, (or use 'Copy and paste').
2. Under [COM-Port] select "Network" and enter the devices IP addresses.
3. Click [Flash] to start the procedure.
As soon as software loading is completed the device will be re-started.
4. Load next le, as described.
Transmitter in eld housing PR 5230 9 Extended functions
Minebea Intec EN-252
To Next Page
Loading...
