Minebea Intec PR 5230 - 4.5.9 Connecting an analog platform (series CAP…)

Description Accessories Ident. Description Chapter
Standard DE1 3 passive (external supply) opto-de-
coupled inputs
4.4.7Digital inputs
DE2 3 active (internal 12 V supply) opto-de-
coupled inputs
4.4.7
Internal outputs:
Standard DA1 3 passive relay outputs (external sup-
ply)
4.4.8.1Digital outputs
DA2 3 passive (external supply) opto-de-
coupled outputs
4.4.8.2
Interface cards:
Standard NoneInterface slot 1
PR 5230/06 C11
1 analog output (0/420 mA)
4.6.2
Standard None
PR 1721/41 C21 ProBus-DP 4.6.5
PR 1721/42 C22 InterBus-S 4.6.6
PR 1721/44 C24 DeviceNet 4.6.7
PR 1721/45 C25 CC-Link 4.6.8
PR 1721/46 C26 ProNet I/O 4.6.9
Interface slot 2
PR 1721/47 C27 EtherNet IP 4.6.10
Standard NoneInterface slot 3
PR 5230/22 C31 Load cell junction board 4.6.3
Cable connections:
Standard None
PR 5230/30 M39 Ethernet socket, RJ-45 connector, IP67 4.6.11
For the "Built-in"
Ethernet interface
only:
Connection cable for
network
PR 5230/31 M40 Ethernet cable, 7 m long, metric cable
gland, RJ-45 connector, industry versi-
on
4.6.12
The type identier (e.g., PR 5230-WE1-Y2-C21-DA2) for the device variant (basic unit +
option) is located on a label inside the door of the device.
3 Device description Transmitter in eld housing PR 5230
EN-29 Minebea Intec