Minebea Intec PR 5230 - 7.8 Resetting the network address; 7.9 Operation using VNC

4.4.6.1 Connecting to a PC or an RS-485/RS-232 converter
Point-to-point connection for following protocols (4-wire):
- SMA
- EW-Com
- ModBus
Switch settings Conguration
ON: S1, S2, S3, S6
OFF: S4, S5, S7, S8
- [Serial ports parameter]- []- [Builtin RS485]
4 Device installation Transmitter in eld housing PR 5230
EN-45 Minebea Intec