Minebea Intec PR 5230 - 7.11.1 Serial ports parameter

Switch setting
PR 5230-1
Switch setting
PR 5230-2
Switch setting
PR 5230-3
Conguration
ON: S6
OFF: S1, S2, S3, S4,
S5, S7, S8
ON: S6
OFF: S1, S2, S3, S4,
S5, S7, S8
ON: S1, S2, S3, S6
OFF: S4, S5, S7, S8
- [Serial ports parameter]- [EW-Com]-
[Builtin RS485]
4.4.6.3 Connecting to PLC
Point-to-point connection for following protocols (2-wire):
- ModBus
- xBPI
Switch settings Conguration
ON: S1, S2, S3, S4, S5, S7
OFF: S6, S8
- [Serial ports parameter]- []- [Builtin RS485]
4 Device installation Transmitter in eld housing PR 5230
EN-47 Minebea Intec