Minebea Intec PR 5230 - 7.11.7.2 xBPI scale weighing point; 7.11.7.3 Pendeo Truck;Process weighing point

The following operations are possible from the connected remote display:
- Readout current weight
- Tare
- Reset tare
- Zero
- Start printout
4.4.6.6 Connecting a PR 5110 remote display to several PR 5230
The remote display PR 5110 can be connected to multiple RS-485 interfaces.
Four-wire transmission and full duplex (simultaneous sending and receiving possible) is
possible.
Transmitter in eld housing PR 5230 4 Device installation
Minebea Intec EN-50