Example:
Voltage output
*
+-
PR 1624
24 V DC 0.5 A
+-
When the output 1 is active (true), the output voltage drops from 24 V/12 V to <3 V DC.
* The load resistance must be 2.2/1 kΩ.
4.4.8.2 Opto-decoupled outputs
This option (order code "DA2") can be used within Ex areas Zone 2 and Zone 22; see also
Option Y2.
The main board has three opto-decoupled outputs.
The digital outputs are passive. An external power supply is required.
Transmitter in eld housing PR 5230 4 Device installation
Minebea Intec EN-62
To Next Page
Loading...
