MIR 250 Hook - Page 25

2. Product presentation
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 25
Rear compartment
The rear compartment components are listed in Table 2.4.
NOTICE
The unique nameplate of your robot is to be mounted on the rear compartment
cover—see "Mounting the nameplate" on page79. Make sure you do not swap the
cover with covers from other robots.
Figure 2.10 Internal parts of the rear compartment.
Pos. Description Pos. Description
1 Battery 2 Battery connector
Table 2.4 Identification of internal parts in Figure 2.10