Mitel 6940 SIP Phone User Guide
•
1
through
24
5.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
6.
In the
BLF List URI
field, enter the name of the BLF list defined on the Busy Lamp field page
for a particular user. For example, sip:9@192.168.104.13.
Expansion Module Keys
7.
Select from
Key 1
through
Key 84
(M695).
8.
In the
Line
field, select a line for which to apply this key. Valid values are:
•global
•
1
through
24
9.
In the
BLF List URI
field, enter the name of the BLF list defined on the Busy Lamp field page
for your particular user. For example, sip:9@192.168.104.13.
10.
Click
Save Settings
.
Configuring XMPP AVATAR
When the XMPP Avatar for picture ID is configured on the phone, the available image is displayed
on the phone (it can be xmpp avatar as well).
And if the image is not available, the phone downloads it from the image server and displays the
image of a blue man.
XMPP can be configured in these two scenarios:
If XMPP enabled
The phone checks for XMPP avatar and the image in the image database.
If XMPP not enabled
The phone only checks the availability of the image in the image database.
(XMPP avatar is not checked as it is not enabled.)
Note:
The
Label
and
Value
field are not required. The BLF/List name is configured in
the
BLF List URI
field instead.
Note:
Contact your System Administrator for the
BLF List URI
.
Note:
The
Value
field is not required. The BLF/List name is configured in the
BLF List
URI
field instead.
Note:
Contact your System Administrator for the
BLF List URI
.
To Next Page
Loading...
Need help?
General
