Mitel 6940 - Configuring an Intercom Key Using the Mitel Web UI; Phone Lock Key

Mitel 6940 SIP Phone User Guide
cxxx
Configuring an Intercom Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML .
or
Click on
Operation > Expansion Module <N> .
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from
Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Icom .
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is
pressed.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84 (M695).
8. In the Type field, select Icom .
9. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is
pressed.
10. Click Save Settings .
Phone Lock Key
You can configure a key on the IP phone to use as a lock/unlock key. You assign the function of the
key as
Phone Lock .
Note: If no value is defined, you will need to manually enter a number after pressing
the Intercom key.
Note: If no value is defined, you will need to manually enter a number after pressing
the Intercom key.