Mitel 6940 - Configuring Call Hold Reminder; Call Waiting Tone Period

Mitel 6940 SIP Phone User Guide
ccx
Configuring Call Hold Reminder
1. Click on Basic Settings > Preferences > General
2.
The Call Hold Reminder field is disabled by default. To enabled this field, check the box.
When this feature is enabled, the reminder ring splash timer starts as soon as you put a call on
hold (even when no other calls are active on the phone). The phone initiates a reminder ring
splash periodically for the single call on hold. When disabled, no reminder ring splash is audible.
3. Click Save Settings .
Call Waiting Tone Period
You can specify a specific time period (in seconds) for the call waiting tone to play at regular intervals
on an active call using the parameter
Call Waiting Tone Period . A value of 0 is the default and
plays the call waiting tone only once on the active call. When the incoming caller hangs up, the call
waiting tone stops on the existing active call.
You can enable or disable this feature in the Mitel Web UI.