Mitel 6940 - Configuring Lock Settings Using the Mitel Web UI

Mitel 6940 SIP Phone User Guide
lxxvi
Unlocking the Phone Using the IP Phone UI
1. Press on the phone to enter the Options List (or press a configured Unlock softkey).
2. At the Enter Unlock Password prompt, enter your user password and press the blue Enter key.
3. At the Unlock the phone? prompt, press Yes .
Configuring Lock Settings Using the Mitel Web UI
Setting a User Password
1. Click on Operation > User Password .
2. In the Current Password field, enter the current user password.
3. In the New Password field, enter the new user password.
4. In the Password Confirm field, enter the new user password again.
5. Click Save Settings .
Note: By default, the user name is user (all lowercase) and the password field is left
blank