Configuring Softkeys
Your 6940 has 12 multi-functional top softkeys and 6 multi-functional bottom softkeys:
• 12 top softkeys: programmable non-state-based softkeys (up to 48 programmable functions)
• 6 bottom softkeys: programmable state-based softkeys (up to 30 programmable functions)
You can use the Mitel Web UI to configure key functions.
The following table lists the functions you can set on the softkeys and provides a description for each
function.
Notes:
1.
If M695 Expansion Modules are attached to the phone, you can configure up to an
additional 84 softkeys on each M695 Expansion Module.
2.
The 6940 IP phone allows up to 3 expansion modules on each phone. For more
information about expansion modules, see “Model M695 Expansion Module” on
page ccxxi.
Key Function Description
None Indicates the key has no function assigned.
Line Indicates the key is configured for line use (programmable on the top softkeys
only).
Speed Dial Indicates the key is configured for speed dial use.
Do Not Disturb Indicates the key is configured for Do Not Disturb (DND) functionality.
BLF Indicates the key is configured for Busy Lamp Field (BLF) functionality
(programmable on the top softkeys only).
BLF/List Indicates the key is configured for BLF/List functionality (programmable on the
top softkeys only).
XML Indicates the key is configured to accept an XML application for accessing
customized XML services.
Bottom
Softkeys
Top Softkeys
To Next Page
Loading...
