Mitel 6940 - How Do I Change My User Password; Why Does My Phone Display Bad Encrypted Config; How Do I Restart the IP Phone; How Do I Lock My Phone

Mitel 6940 SIP Phone User Guide
ccxxiv
How do I change my user password?
You can change the user password from the IP phone UI or the Mitel Web UI. See “Password”on
page lxxiv and “Configuring Lock Settings Using the Mitel Web UI”on page lxxvi for more information.
Why does my phone display Bad Encrypted Config?
The IP phone displays Bad Encrypted Config because encrypted configuration files are enabled
but the decryption process has failed. Report this error to your System Administrator.
How do I restart the IP phone?
You can restart the phone from the IP phone UI or through the Mitel Web UI. See “Restarting Your
Phone Using the IP Phone UI”on page lxxxix and “Restarting Your Phone Using the Mitel Web UI”on
page xci for more information.
How do I lock my phone?
You can lock your phone to prevent the phone from being used or configured. You can lock the
phone using any of the following:
• At the path
Options > Phone Lock on the IP phone UI. See “Phone Lock”on page lxxiv for more
information.
• At the path
Operations > Phone Lock on the Mitel Web UI. See “Configuring Lock Settings Using
the Mitel Web UI”on page lxxvi for more information.
• At a configured key on the phone. For more information about configuring a Lock/Unlock key
on your phone, see “Phone Lock Key” on page cxxx.