Mitel 6940 SIP Phone User Guide
Brightness Settings
The
Brightness Level
option on the IP phone allows you to set the amount of light that illuminates
the LCD display. Use this option to set the preference of brightness level.
The
Brightness Timer
option allows you to set the amount of time you want the LCD display to
stay illuminated before turning the backlight off during a period of inactivity. For example, if you set
the brightness timer to 60, when the phone reaches 60 seconds of inactivity, the LCD backlight goes
off. You can set the brightness level and timer using the configuration files and IP phone UI.
Setting the Brightness Level and Timer Using the IP Phone UI
1.
Press on the phone to enter the Options List.
2.
Press the
Display
icon.
3.
Press the
Brightness Level
field.
4.
Press the left and right arrow buttons in the
Brightness Level
field to increase or decrease the
intensity of brightness on the LCD.
5.
Press the
Brightness Timer
field.
6.
Enter a value, in seconds, using the on-screen keyboards. You can set the timer from 1 to 36000
seconds. Default is 600 (10 minutes).
7.
Press the
Save
softkey
to save your changes.
Dialing
Live Dialpad
The
Live Dialpad
option on the IP phone turns the live dialpad mode on or off. With the live dialpad
feature enabled, the 6940 IP phone automatically dials out and turns on handsfree mode as soon
Note:
The Backlight timer/mode can be configured using the configuration files and the IP Phone
User Interface (UI)
.
To Next Page
Loading...
